Search results

Bench scale and flame manikin tests are two typical methods to evaluate thermal protective performance (TPP) of fire protective clothing. However, flame manikin test is limited to be widely used for its complication and high cost. The purpose of this paper is to develop a method to evaluate the thermal performance of protective clothing from the bench scale test results and garment parameters, which predicts the body burn injuries without conducting flame manikin tests.

Bench scale and flame manikin tests’ data were collected from the previous research literature and then statistical analysis was performed to quantitatively investigate the correlations between the two test methods. Equations were established to predict the TPP values accounting for the effects of entrapped air gap and thermal shrinkage. Fitting analysis was conducted to analyze the relationship between the predicted TPP values and total burn injury. Finally, a method to predict total burn injury from the TPP values was proposed and validated.

The results showed that when the TPP value was predicted with the effects of air gap and thermal shrinkage considered, there was an approximate linear relationship between the predicted TPP values and total burn injury from the manikin test. Therefore, the prediction model of burn injury was developed based on the correlation analysis and verified with a generally good accuracy.

This paper presented a new prediction method to evaluate the thermal performance of protective clothing, which saved significant time and cost compared to the conventional methods. It can provide useful information for burn injury prediction of protective clothing.

The purpose of this paper is to develop a new approach for rapid computation of subsonic and low-transonic rotary derivatives with the available steady solutions obtained by Euler computational fluid dynamics (CFD) codes.

The approach is achieved by the perturbation on the steady-state pressure of Euler CFD codes. The resulting perturbation relation is established at a reference Mach number between rotary derivatives and normal velocity on surface due to angular velocity. The solution of the reference Mach number is generated technically by Prandtl–Glauert compressibility correction based on any Mach number of interest under the assumption of simple strip theory. Rotary derivatives of any Mach number of interest are then inversely predicted by the Prandtl–Glauert rule based on the reference Mach number aforementioned.

The resulting method has been verified for three typical different cases of the Basic Finner Reference Projectile, the Standard Dynamics Model Aircraft and the Orion Crew Module. In comparison with the original perturbation method, the performance at subsonic and low-transonic Mach numbers has significantly improved with satisfactory accuracy for most design efforts.

The approach presented is verified to be an efficient way for computation of subsonic and low-transonic rotary derivatives, which are performed almost at the same time as an accounting solution of steady Euler equations.

The purpose of this paper is to provide the historical background of genealogical records and analyze the value of Chinese genealogical research through the study of names and genealogical resources.

The paper examines the historical evolution and value of Chinese genealogical records, with the focus on researching the Islamic Chinese names used by the people living in Guilin. The highlight of this paper includes the analysis and evolution of the Islamic Chinese names commonly adopted by the local people in Guilin. It concludes with the recommendations on emphasizing and making the best use of genealogical records to enhance the research value of Chinese overseas studies.

The paper covers the history of Islam and describes how the religion was introduced into China, as well as Muslims' ethnicity and identity. It also places focus on the importance of building a research collection in Asian history and Chinese genealogy.

This research study has a strong subject focus on Chinese genealogy, Asian history, and Islamic Chinese surnames. It is a narrow field that few researchers have delved into.

The results of this study will assist students, researchers, and the general public in tracing the origin of their surnames and developing their interest in the social and historical value of Chinese local history and genealogies.

The study of Chinese surnames is, by itself, a particular field for researching the social and political implications of contemporary Chinese society during the time the family members lived.

Very little research has been done in the area of Chinese local history and genealogy. The paper would be of value to researchers such as historians, sociologists, ethnologists and archaeologists, as well as students and anyone interested in researching a surname origin, its history and evolution.

This paper seeks to discuss the genealogical sources for Chinese immigrants as well as the settlement of Chinese in the USA and the historical evolution of Chinese names, their origins, arrangement and development. It aims to cover the origins of various classes of Chinese surnames, followed by the content description of a traditional genealogical book for jiapu.

The paper researches the various ways that a Chinese person can find out about their ancestry.

The paper reveals the roles of libraries, including serving the needs of patrons interested in genealogical research, preserving and interpreting information through oral and family history projects and collaborating with other libraries through interlibrary loan, document delivery, library consortia, collection management and international resource‐sharing.

The study provides information on where and how to locate the genealogical resources for researching the genealogy of a Chinese family.

The paper analyzes the value of genealogical research as a documentary source for population history, life expectancy in a clan, marriages and family connections, as well as lineage organizations and inter‐lineage relations.

The purpose of this paper is to study the combined effects of moisture and radiation on thermal protective performance of protective clothing exposed to low level radiation.

Using a sweating manikin, the effect of radiation and moisture on heat and moisture transfer was initially analyzed under the dry manikin with sweating rate of 100 g/(m2h) exposed to 2.5 kW/m2, and then studied at 200 and 300 g/(m2h) exposed to 2 and 3 kW/m2, respectively. Finally, the combined effects of thermal radiation and moisture were predicted by fitting the relationships among heat loss and wet skin surface temperature, with the sweating rate and radiation intensity.

The results show that the heat loss and the wet skin surface temperature are affected by the combined effects of moisture and radiation, with two distinctly different trends. Heat loss from the manikin is increasing with the sweating rate, and decreasing with thermal radiation intensity. However, the wet skin surface temperature has an opposite situation.

Two filling equations are given to present the relationships among heat loss and wet skin surface temperature, with the sweating rate and radiation intensity. With these two equations, the heat loss and the wet skin surface temperature when exposed to radiation can be predicted by only measuring the mean radiant and ambient temperatures and controlling the sweating rate.

The purpose of this paper is to analyze long-term institutional causes and consequences of preference falsification by studying the evolution of China’s patriarchal clan system.

The historic study shows that although the clan system was abolished in the Qin dynasty, it re-emerged among high-standing families in the Han dynasty and spread to common people after the Tang dynasty.

The author submits that the clan system was an institutional response to the preference falsification problem that arose due to the dictatorial political institutions first established in the Qin dynasty. It helped people to take collective action by themselves and also opened a back door to influence government decisions. A piece of clear evidence is the co-evolution of the clan system and government personnel system.

In this sense, the clan system probably also helped to prolong the political institutions for 2,000 years.

This is the first institutional study on the clan system in China.

The purpose of this paper is to measure the thermal insulation of protective clothing with multilayer gaps in low-level heat exposures.

Nine different combinations of protective clothing systems with multiple air gaps are used to measure the thermal insulation by a self-designed bench-scale test apparatus in different levels of an external thermal radiation of 2-10 kW/m2. The outside and inside surface temperatures of each fabric layer are also measured to calculate the local thermal insulation of each fabric layer and each air gap.

The results show that the total thermal insulation of protective clothing under thermal radiation is less than that in normal environments, and the exposed thermal radiation will worsen the total thermal insulation of the multilayer fabric systems. Air gap plays a positive role in the total thermal insulation, and thus provides the enhanced thermal protection. It is also suggested that the local resistance of the air gap closer to the external thermal radiation is more easily affected by the thermal radiation, due to the different heat transfer ways in the fabric system and the external thermal radiation.

Effects of air gap on the thermal insulation of protective clothing, and contribution of the local thermal resistance of each fabric layer and each air gap to the total thermal insulation.

Many manufacturers are transforming into manufacturing service industry to enhance their value creation. Adopting the value‐added chain model, this study aimed to conduct four case studies, including Acer, Giant, TSMC and Eternal, to verify the high‐valued strategies and the common characteristics of service provisions.

Four case studies, including Acer, Giant, TSMC and Eternal, were conducted to verify the high‐valued strategies and the common characteristics of service provisions. Specifically, these companies are selected from different industry and value chain position to enhance the robustness of the research findings.

This study concluded that the manufacturing firms strengthen their position as system integrator. The provision of high‐valued services is orientated toward the integration of the value chain stages according to the industry and business model. The companies are going to upstream or downstream, outsource non‐core manufacturing activities, and sell some manufacturing assets. The high‐valued service strategies provided the manufacturing firms with new approaches to compete in a rapidly changing economy. The findings also provided the direction for the emerging economies in confronting with industrial structure transformation.

This study focuses on the transformation of four manufacturing firms toward providing high value‐added services. The results conclude that manufacturing firms can integrate forward and backward stages in the value‐added chain, and provide the knowledge‐based services including R&D, marketing, information system, branding, financial and after‐sale services to enhance the market value of their products. This study argues that the high value‐added service strategies can be a great opportunity for the manufacturers.